“Hands In” Hand Dryer

$1,513.00 $1,361.00

SKU: Brad - 2921 Categories: ,


Standard Model 2921-W00000 (high impact ABS – white) Bradex®  Standard Model 2921-S00000 (high impact ABS – Silver) Bradex® Product Materials 2921-W Cover: High impact ABS; White. Antimicrobial agent applied to inhibit the growth of mold, mildew and fungus. 2921-S Cover: high impact ABS; Silver. Antimicrobial agent applied to inhibit the growth of mold, mildew and fungus. Adjustable Motor: thermally protected universal brush type motor operating at 35,000 RPM. High/Low setting options. Filter: HEPA filter with odor neutralizing tablet reduces contaminates in the air when hand drying. Sensor Operation: electronic infrared sensor. Automatic shut off after 20 seconds. Water Reservoir: collects water to prevent water from going on the floor. LED Display: LED’s 1 through 4 flash green while dryer is in operation. LED 5 is solid green when dryer is in standby mode; solid blue when dryer is in operation. LED 6 is unlit during normal operation; flashing red when HEPA filter requires replacement. LED 7 is unlit during normal operation; solid blue when water collection tank needs emptying. Installation Verify all rough-in dimensions prior to installation. Hand dryers require a dedicated circuit and must be properly grounded. GFI Circuit protection is recommended. It is recommended that 1 of the 4 mounting anchors is fastened into a wall stud or support. Dryer has a polarized plug eliminating the need for hard wiring. In order to prevent exposure of the electrical cord, Bradley recommends using a recessed outlet box. Bradley’s recessed outlet box part number is P10-752. Operation Place hands into cavity of dryer. Slowly move hands up and down through air stream until dry. Dryer will stop after hands are removed from cavity. Recommended for very high traffic areas.

ADA Compliant Consult local and national accessibility codes for proper installation guidelines. Conformity and compliance to local and national codes is the responsibilty of the installer.

Product Specifications Voltage: 110–120 V Consumption: 10 A Nominal power: 1200 W RPM: 35,000 Airflow: 85 CFM Airspeed: 29,480 LFM Noise level: 76 dB Insulation: Grounding required Frequency: 60 Hz Certificates: UL 507 / CSA C22.2 (No. 68) Drying time: 10–12 seconds Mounting: Surface. ADA-compliant Protection level: IP33

Additional information

Weight 26 lbs
Dimensions 14.0 x 10.0 x 8.0 in